Beverage Line Cleaning Instructions

  • To clean the TapWise system, place the station in 'cleaning mode' in Remote Station Manager (RSM).
  • Our system uses a push button functionality to dispense. Simply press the tap button to start and press it to stop.  This allows you to push the solution through continuously until you are done.
  • Each station corresponds with a physical tap in RSM, so you know which station you are working with. 

NOTE:   1) we use Sankey-D couplers, 2) multiple lines can be flushed at the same time if you hook up more than one cleaning keg to the couplers.


Downloadable instructions are below: