Using Sestra's Size Selector Buttons

Here is how to pour a glass at a station with Sestra's Size Selector buttons installed (pictured).

IMG_6922

Pour Sizes

Push to Pour buttons with Size Selectors can be programmed to pour up to 4 sizes per tap - a primary pour and up to 3 alternative pour.

A Primary Pour is the size the tap is set to dispense when the main button is simply pressed and released once. It should be your most common pour size.

Each Alternative Pour is dispensed using one of the smaller size selector buttons. It is often used for taste pours, double pours, carafes, or other specialty sizes.

Pouring a Primary Pour

For non-carbonated beverages: 

  1. Place your glass below the tap. 
  2. Press and release the LARGE, leftmost button once. Do not hold the button.
  3. Button light will go dark while pouring. Wait for dispensing to complete.

For carbonated beverages: 

  1. Hold your glass up to the tap at a 45 degree angle. 
  2. Press and release the LARGE, leftmost button once. Do not hold the button.
  3. Gently turn the glass upright as it fills, starting when the glass is about 2/3 full.
  4. Button light will go dark during dispensing. Wait for dispensing to complete.

Pouring an Alternative Pour 

For non-carbonated beverages: 

  1. Place your glass below the tap. 
  2. Press and release your desired size selector button once. Do not hold the button. The LED light above the button should light up.
  3. Press and release the LARGE, leftmost button once. Do not hold the button.
    Note: once Alternative Pour is initiated, there is a 5 second window to press the large button to begin dispensing. After 5 seconds, the Alternative Pour sequence will timeout and the button will reset to Primary Pour.
  4. The large button light will go dark. Wait for dispensing to complete. 

      For carbonated beverages: 

      1. Hold your glass up to the tap at a 45 degree angle. 
      2. Press and release your desired size selector button once. Do not hold the button. The LED light above the button should light up.
      3. Press and release the LARGE, leftmost button once. Do not hold the button.
        Note: once Alternative Pour is initiated, there is a 5 second window to press the large button to begin dispensing. After 5 seconds, the Alternative Pour sequence will timeout and the button will reset to Primary Pour.
      4. Gently turn the glass upright as it fills, starting when the glass is about 2/3 full.
      5. The large button light will go dark. Wait for dispensing to complete.